Huepar E011G – Green Beam Cross Line Self-leveling Laser Levels Tool with Motion Sensor & Li-ion Battery

Huepar E011G Green Cross Line Laser Level Specifications:

● Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW

● Laser: Three Modes with Green Beam: Horizontal/Vertical/Cross Lines

● Working Distance (Line): 25m

● Working Distance (Line with Detector): 50m

● Laser Wavelength: 510-530 nm

● Accuracy: ±3mm/10m

● Leveling/Compensation Range: 3°±1°

● Operating Time: 7 hours with all laser beams on

● Power Source: 3.7V/2200mAh built-in rechargeable Li-ion battery

● Mount Size: 1/4″-20

● IP Rating: IP54, waterproof, dustproof and shockproof, reliable and tough

● Operating Temperature: Between -10℃ and +50℃

● Storage temperature: Between -20℃ and +70℃

WARNING: Do not point the laser beam directly into the eyes.

Product Description

Product Description:

Motion Sensor

This laser level uses with infrared sensor,by waving your hand to switch cross lines, horizontal or vertical line -3 line modes, no need to touch the button. It can also be operated with wet hands or wearing gloves. The Sensing distance is 0-10 cm. This green laser could save your lots of time and make your job easier.

Large capacity lithium battery
Huepar E011G laser level employed a 3.7V / 2200mAh built-in rechargeable Li-ion battery, it only takes 2 hours to fill recharge fully. The longest working time is up to 7 hours,it can meet your work needs all day long. Through the Type-C charging port you can directly plug into power bank or laptop or any other USB port to charge the laser level 

Large Expansion Angle

130 ° Vertical Line and 114° Horizontal Line can easily deliver laser lines from the floor to the ceiling and wall. Provides great convenience for your photo hanging, tile alignment, window and door installation, etc.

Magnetic Bracket &Compatible with Tripod

The magnet on the powerful L-shaped magnetic adsorption bracket can be firmly attached to any place. You can safely install the laser level on it to achieve 360° rotation. The laser level also provides a 1/4″-20 thread to mount to a standard tripod or laser pole.

<< return to products
Scroll to Top